NewtOn Curing

Professional composition, protection of freshly poured concrete and monolith from premature loss of moisture. Long-term protection even at high ambient temperatures.


Produced as a concentrate. 

To obtain a ready-to-use composition, the concentrate is diluted with water in a ratio of 1 liter to 7 liters or 1 liter to 5 liters

Consumption of ready-to-use solution - 200-270 ml / m2

Application areas:

An innovative concentrate material to significantly reduce the rate of evaporation of water from a freshly laid concrete base.

  • excludes the formation of shrinkage hairline cracks during the setting of concrete and gaining strength;

  • reduces shrinkage when setting concrete;

  • ensures the achievement of the specified strength;

  • eliminates the formation of dust on the surface during concrete shrinkage;

  • increases the frost resistance of concrete;

  • in the case of applying any subsequent layer to the concrete surface (for example, cement screed, plaster), there is no need to remove it with a high pressure washer, etc.;

  • eliminates the need to cure concrete in wet conditions or cover the concrete surface with a wet rag.

It is used as a water-retaining emulsion for fresh concrete and as a surface hardener for existing loose floors, as well as to increase their strength and resistance to abrasion. The emulsion is especially effective when applied to large areas of exposed concrete such as industrial floors, parking spaces, concrete floors, etc. Along with this, the material is used for application to vertical surfaces.

Newton Curing4.jpg

Newton Curing - designed to retain moisture in concrete during the process of concrete hydration, as well as to protect against moisture loss when installing thin-layer cement coatings and repair cement compositions:

  • in production facilities

  • in warm and cold warehouses

  • in car services, parking lots, garages

  • in shopping centers and shops

  • at airports, bus stations

When applied:

  • reduces moisture loss in fresh concrete by 90%

  • prevents the formation of hairline cracks during shrinkage during the initial phase of concrete curing

  • increases surface resistance to penetration of oils and some petroleum products

  • prevents dust emission, increases abrasion resistance

  • fast and easy to use

©2011 by NewtOn Coating.  All rights reserved